Silicone rubber water stop belt can be seen everywhere in our life. It is often used in places where the water stop belt has high requirements, but the silicone rubber water stop belt itself has high storage requirements. If improperly stored, it will affect the quality of the silicone rubber water stop belt. The following liquid silicone rubber manufacturer will introduce the storage of silicone rubber sealing strip.

1, the temperature is too high to accelerate the softening of the water stop belt, the temperature is too low to increase the possibility of freezing crack, which will have a great impact on the performance of the rubber water stop belt.

2, avoid direct sunlight is also a very important factor, if you do not pay attention to this point in saving, will directly lead to the color of the seal changes.

3. After leaving the factory, it should be put into a well-sealed bag to avoid contact between air and water. If the air tightness is not strict, it will accelerate the aging of the sealing strip.

In our life, silicone rubber sealing ring can be used for electrical equipment, before you use it, you may smell a very heavy taste, some silicone rubber sealing ring smell is different, want to eliminate the smell of silicone rubber sealing ring, mainly by the following methods:

It is recommended that you use 160-170 degrees of curing for 3-4 hours, to reduce the smell, you do a good job of the finished product to find another large basin (water temperature of 70-80 degrees, the finished product is placed in the inside of the bubble for a period of time, after washing, drying, packaging, it is ok.

Suzhou Lanxin Rubber & Plastic Hardware Co., LTD. Suzhou Lanxin Rubber & Plastic Hardware Co., LTD. Suzhou Lanxin Rubber & Plastic Hardware Co., LTD. Suzhou Lanxin Rubber & Plastic Hardware Co., LTD. Suzhou Lanxin Rubber & Plastic Hardware Co., LTD. The company was founded in 1997, headquartered in Dongguan Shipai. The company branches in Hong Kong, Taiwan, Suzhou, beigong more than 400 people. The existing self-built industrial park of more than 30,000 square meters. Divided into die-cutting coating, silicone rubber vulcanization molding, screen printing plate, precision hardware four blocks. In 2012, we set up a branch factory in Suzhou, covering an area of about 3000 square meters, which is divided into die cutting, screen printing and vulcanization molding. Liquid silica gel products company is located in Jiangsu Province Kunshan City qiandeng Town Qinfeng South Road no. 904, near Shanghai, Suzhou and other key cities, convenient transportation and superior geographical environment.