The automatic grinding machine has the characteristics of reasonable structure, fast polishing speed and convenient adjustment. Adjusting wheel speed can be adjusted to meet different grinding requirements and grinding speed of the workpiece. Optional add dust removal system. It is suitable for grinding the surface of square steel pipe in electroplating, drawing and other industries of automobile hardware. So how should we maintain it when we use automatic sanding machine?
1, open the automatic grinding machine, the workpiece through the fall much in polishing barrels, less how many artifacts and artifact, the relationship between the weight and size of such increase slowly into the workpiece, workpiece rotate falling, but does not produce artifacts, when the workpiece fixed rotation, polishing liquid products will be uneven, grinding time will increase with unnecessary.
2. Do not splash liquid and water on wires and plugs when using automatic sanding machine. The overcurrent switch shall be installed in the W-type electromechanical power supply. It is recommended to use more than 10A.
3. After turning on the power supply, please check whether the cold air cooling fan in the rear cover is in normal operation.
4. If the automatic grinding machine does not work at low frequency for a long time, lightning may damage the machine.
5, want to prolong the service life of the automatic grinding machine, daily maintenance is very important, the polishing barrel leaks, the bottom of the thorn polishing needle can be removed with pliers, a little glue, the timer does not flash, no start switch, according to the time. If the water in the polishing bucket is too hot, replace the water in time (normal temperature range is 50°C). If the vibration of automatic grinding machine is serious, check whether each Angle of the machine is in the position of force, and adjust the length. Also check whether the machine has a working voltage of less than 220V;